model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 emitting color:red/green/blue smt package lens type: water clear. http://www.foryard.com pb-free reflow soldering application rohs compliant approved by FYLS-0603ARGBC a features: indicators product specification model no. FYLS-0603ARGBC customer approved signatures top led type size (mm):1.6*0.8*0.3 checked by applications: light strips lcd backlight decorative lighting prepared by interior automotive illuminations mobile phones
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010]. 2.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 FYLS-0603ARGBC a model no. FYLS-0603ARGBC http://www.foryard.com
model. no. rev. g b 30 30 100 100 100 100 color min r 2.00 g 3.20 b 3.20 r 645 g 525 b 468 r 631 g 520 b 470 r 78 g 300 b 115 --- 120 --- rg b page 3/8 http://www.foryard.com storage temperature tstg mw typical electrical &optical charcteristics(ta=25oc ) model no. FYLS-0603ARGBC forward current(dc) pd ma ma FYLS-0603ARGBC absolute maximun ratings(ta=25 o oo o c) *pulse width Q Q Q Q 1msec duty Q Q Q Q 1/10 absolute maximum rating if -30 o c +80 o c a ifp reverse voltage power dissipation operation temperature topr items peak forward current* items max 2.60 -40oc +100oc soldering temperature vr tsol 5 v note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. unit unit 3.60 material gold silicone 10 condition vf forward voltage // 3.60 item reflector wire encapsulate p r 30 100 78 symbol if = 20ma symbol reflow soldering:250 /5sec ingan algainp chip silicone material reverse current ir vr = 5v u a peak emission wavelength v nm material gold silicone ingan / material gold 50% power angle 2? if = 20ma deg nm mcd dominant wavelength if = 20ma d luminous intensity iv if = 20ma if = 20ma
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 http://www.foryard.com FYLS-0603ARGBC a model no. FYLS-0603ARGBC ambient temperature ta( ) forward current vs forward voltage forward voltage(v) forward current derating curve forward current(ma) forward current(ma) luminous intensity vs. ambient temperature ambient temperature ta( ) c relative luminous intensity 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70 80 90 3.1 3.3 10 0 20 30 40 50 forward current if(ma) relative intensity (lop@20ma=1) relative luminous intensity vs forward current normalized response wave length(nm) spectral reduance ingan/al 2 o 3 3.5 3.7 3.9 1.9 2.1 2.3 2.5 ingan/sic algainp 2.9 2.7 (1) (2) (3) relative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 http://www.foryard.com FYLS-0603ARGBC model no. FYLS-0603ARGBC a
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 http://www.foryard.com FYLS-0603ARGBC a model no. FYLS-0603ARGBC foryard o p t o e l e c t r o n i c s led ledled led pn:fyls-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohs rohs rohs attention attention attention attention 0603a 4000/reel 9 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 18 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 3 8 . 0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as a FYLS-0603ARGBC (1) manual soldering with a soldering iron secondary protection (2)reflow soldering required if the shelf life has expired model no. FYLS-0603ARGBC http://www.foryard.com before opening the packaging , check for air leaks in the bag. baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 1. storage and soldering time no more than 2 seconds. the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. frequently during the baking process. 2. soldering the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is temperature profile peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, duration above 183 is 80 sec. max time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 ramp-down rate:6 /sec.max peak temperature:250 FYLS-0603ARGBC a http://www.foryard.com model no. FYLS-0603ARGBC solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max duration above 217 is 80 sec. max average ramp-up rate:4 /sec.max solder= pb-free (3) recommend soldering pad design(unit=mm) the appearance and specifications of the product ma y be modified for improvement without notice. reflow soldering should not be done more t han one time high-brightness led light may injure human eyes. av oid looking directly into lighted led must be pre-qualified to avoid damage to t he smd leds. preheat time:100seconds.max no stress should be exerted on the package during soldering. when washing is required, ipa (isopropyl alcohol) s hould be used. this device should not be used in any type of fluid such as water, oil, organic solvent and etc is changed slightly an operating current and therm al. 4. others all devices, equipment and machinery must be proper ly grounded esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. 3. static electricity
|
